13518219792
小编给大家分享一下keepalived+ceph rbd如何配置nfs的高可用，相信大部分人都还不怎么了解，因此分享这篇文章给大家参考一下，希望大家阅读完这篇文章后大有收获，下面让我们一起去了解一下吧！
10年积累的做网站、网站建设经验，可以快速应对客户对网站的新想法和需求。提供各种问题对应的解决方案。让选择我们的客户得到更好、更有力的网络服务。我虽然不认识你，你也不认识我。但先网站设计后付款的网站建设流程，更有公安免费网站建设让你可以放心的选择与我们合作。
试验机器为ceph中的osd1和osd2主机，ip分别为192.168.32.3、192.168.32.4，vip为192.168.32.5。
先创建一个rbd块设备，然后在两台机器上导出此相同的块：
[root@osd1 keepalived]# rbd ls test test.img [root@osd1 keepalived]# rbd showmapped id pool image snap device 0 test test.img - /dev/rbd0 [root@osd2 keepalived]# rbd showmapped id pool image snap device 0 test test.img - /dev/rbd0
然后将/dev/rbd0格式化后进行挂载，如/mnt目录。
从http://www.keepalived.org/download.html下载最新的keepalived 1.2.15版本，安装比较简单，直接按照INSTALL的说明进行默认安装即可。为了方便管理keepalived服务，需进行以下操作：
cp /usr/local/etc/rc.d/init.d/keepalived /etc/rc.d/init.d/ cp /usr/local/etc/sysconfig/keepalived /etc/sysconfig/ mkdir /etc/keepalived cp /usr/local/etc/keepalived/keepalived.conf /etc/keepalived/ cp /usr/local/sbin/keepalived /usr/sbin/ chkconfig --add keepalived chkconfig keepalived on chkconfig --list keepalived
配置/etc/keepalived.conf。osd1的配置如下：
[root@osd1 keepalived]# cat keepalived.conf
global_defs
{
notification_email
{
}
router_id osd1
}
vrrp_instance VI_1 {
state MASTER
interface em1
virtual_router_id 100
priority 100
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
virtual_ipaddress {
192.168.32.5/24
}
}osd2的配置如下：
[root@osd2 keepalived]# cat keepalived.conf
global_defs
{
notification_email
{
# admin@example.com
}
#notification_email_from admin@example.com
#smtp_server 127.0.0.1
#stmp_connect_timeout 30
router_id osd2
}
vrrp_instance VI_1 {
state BACKUP
interface em1
virtual_router_id 100
priority 99
advert_int 1
authentication {
auth_type PASS
auth_pass 1111
}
notify_master "/etc/keepalived/ChangeToMaster.sh"
notify_backup "/etc/keepalived/ChangeToBackup.sh"
virtual_ipaddress {
192.168.32.5/24
}
}在osd2写了两个控制脚本，用于osd2的keepalived状态改变时执行。ChangeToMaster.sh：
[root@osd2 keepalived]# cat ChangeToMaster.sh #!/bin/bash service nfs start ssh lm "umount -f /mnt" ssh lm "mount -t nfs 192.168.32.5:/mnt /mnt"
ChangeToBackup.sh:
[root@osd2 keepalived]# cat ChangeToBackup.sh #!/bin/bash ssh lm "umount -f /mnt" ssh osd1 "service nfs stop" ssh osd1 "umount /mnt" ssh osd1 "rbd unmap /dev/rbd0" ssh osd1 "rbd map test/test.img" ssh osd1 "mount /dev/rbd0 /mnt" ssh osd1 "service nfs start" ssh lm "mount -t nfs 192.168.32.5:/mnt /mnt" service nfs stop umount /mnt rbd unmap /dev/rbd0 rbd map test/test.img mount /dev/rbd0
在ceph的一个节点利用rbd map一个块设备，然后格式化并挂载在一个目录，如/mnt。在此节点上安装nfs的rpm包：
yum -y install nfs-utils
设置挂载目录：
cat /etc/exports /mnt 192.168.101.157(rw,async,no_subtree_check,no_root_squash) /mnt 192.168.108.4(rw,async,no_subtree_check,no_root_squash)
启动并导出：
service nfs start chkconfig nfs on exportfs -r
客户端查看一下：
showmount -e mon0 Export list for mon0: /mnt 192.168.108.4,192.168.101.157
然后挂载：
mount -t nfs mon0:/mnt /mnt
需要注意的是，NFS默认是用UDP协议，如果网络不稳定，换成TCP协议即可：
mount -t nfs mon0:/mnt /mnt -o proto=tcp -o nolock
关闭osd1的网卡em1查看结果：
