13518219792
1. 可以通过SSH, Telnet, 或者serial console
创新互联公司专业为企业提供吉林网站建设、吉林做网站、吉林网站设计、吉林网站制作等企业网站建设、网页设计与制作、吉林企业网站模板建站服务，10余年吉林做网站经验，不只是建网站，更提供有价值的思路和整体网络服务。
2. CLI的配置是分级的结构，如下所示：
config system interface
edit "internal"
set vdom "root"
set ip 192.168.100.99 255.255.255.0
set allowaccess ping https ssh snmp http telnet
set type physical
next
end
3. 命令行层次结构具体有下面这些关键字：
config
edit
next
end
exit
abort
4. 使用 “?” 可以查询可用当前级别可以的指令
5. 使用
6. 设置wan2的IP:的例子：
FortiGate-60 # config system interface
(interface)# edit wan2
(wan2)# set ip 192.177.11.12 255.255.255.248
(wan2)# end
FortiGate-60 #
7. 可以用“get”命令显示参数和当前值：
(internal)# get
name : internal
vdom : root
cli-conn-status : 0
mode : static
dhcp-relay-service :
dhcp-relay-ip :
dhcp-relay-type :
ip : 192.168.96.254 255.255.255.0
allowaccess : ping HTTPS HTTP telnet
8. 可以用“show”命令显示当前配置：
FGT50B3 # config system interface
FGT50B3 (interface) # edit internal
FGT50B3 (internal) # show
config system interface
edit "internal"
set vdom "root"
set ip 192.168.100.99 255.255.255.0
set allowaccess ping https ssh snmp http telnet
set type physical
next
end
9. 可以用“show full-configuration”命令显示当前完全配置：
FGT50B3 # config system interface
FGT50B3 (interface) # edit internal
FGT50B3 (internal) # show full-configuration
config system interface
edit "internal"
set vdom "root"
set mode static
set dhcp-relay-service disable
unset dhcp-relay-ip
set dhcp-relay-type regular
set ip 192.168.100.99 255.255.255.0
set allowaccess ping https ssh snmp http telnet
set gwdetect disable
unset detectserver
set ha-priority 0
set pptp-client disable
set arpforward enable
set broadcast-forward disable
set bfd global
set l2forward disable
set icmp-redirect enable
set vlanforward enable
set stpforward disable
set ident-accept disable
set ipmac disable
set subst disable
set log disable
set fdp disable
set dDNS disable
set status up
set netbios-forward disable
set wins-ip 0.0.0.0
set type physical
set tcp-mss 0
set inbandwidth 0
set outbandwidth 0
set description ''
set alias ''
set l2tp-client disable
config ipv6
set autoconf disable
set ip6-address ::/0
unset ip6-allowaccess
set ip6-default-life 1800
set ip6-hop-limit 0
set ip6-link-mtu 0
set ip6-manage-flag disable
set ip6-max-interval 600
set ip6-min-interval 198
set ip6-other-flag disable
set ip6-reachable-time 0
set ip6-retrans-time 0
set ip6-send-adv disable
end
set idle-timeout 0
unset macaddr
set mtu-override disable
next
end
10. 执行某些命令，例如:
execute factoryreset
execute ping
execute backup
execute traceroute
execute reboot
