13518219792
判断吧，如果点击+按钮，则一个全局变量为1，-按钮，则全局变量为2.以此类推，然后if或case判断哪个数，如果为1，就两个数相加。
创新互联建站于2013年开始，先为江阳等服务建站，江阳等地企业，进行企业商务咨询服务。为江阳企业网站制作PC+手机+微官网三网同步一站式服务解决您的所有建站问题。
参考下面方法操作：
操作工具：计算器
1、首先以一道累加公式为例来说明计算器的这个功能。如下图。
2、先在计算器上计算120*12这个乘法，记住不要按＝号。
3、然后要按下键盘上的M+这个键，这个就是累加键。
4、按下累加键后就可以看到120*12这个乘法的得数了。
5、此时按着将算式240*2输入，同样不按＝号。
6、要按一次M+累加键，这时算式的得数就显示出来。
7、再没有其他算式的情况下，此时需要按MR键。
8、就可以得到累加后的得数了。得数1920后面有一个显示累计算的M字样。
VB6.0便携小程序很方便，今天我们就来看看vb制作一个加法计算器的教程。
1、启动软件，新建一个变准 EXE工程 。
2、我们在窗体上绘制好要使用到的控件。
3、双击 计算按钮 进入代码窗口，我们可以在这里编写代码。
4、接下来我们打入累加的 赋值语句。
5、接下来我们点击运行测试的 小三角。
6、这时候我们就可以开始计算了。
以上就是VB6.0编写一个加法计算器的方法，希望大家喜欢，请继续关注我们。
Public Class SimpleCalculator
Inherits System.Windows.Forms.Form
#Region " Windows 窗体设计器生成的代码 "
Public Sub New()
MyBase.New()
'该调用是 Windows 窗体设计器所必需的。
InitializeComponent()
'在 InitializeComponent() 调用之后添加任何初始化
End Sub
'窗体重写处置以清理组件列表。
Protected Overloads Overrides Sub Dispose(ByVal disposing As Boolean)
If disposing Then
If Not (components Is Nothing) Then
components.Dispose()
End If
End If
MyBase.Dispose(disposing)
End Sub
'Windows 窗体设计器所必需的
Private components As System.ComponentModel.IContainer
'注意：以下过程是 Windows 窗体设计器所必需的
'可以使用 Windows 窗体设计器修改此过程。
'不要使用代码编辑器修改它。
Friend WithEvents Label1 As System.Windows.Forms.Label
Friend WithEvents TextBox1 As System.Windows.Forms.TextBox
Friend WithEvents Button1 As System.Windows.Forms.Button
Friend WithEvents Button2 As System.Windows.Forms.Button
Friend WithEvents Button3 As System.Windows.Forms.Button
Friend WithEvents Button4 As System.Windows.Forms.Button
Friend WithEvents Button5 As System.Windows.Forms.Button
Friend WithEvents Button6 As System.Windows.Forms.Button
Friend WithEvents Button7 As System.Windows.Forms.Button
Friend WithEvents Button8 As System.Windows.Forms.Button
Friend WithEvents Button9 As System.Windows.Forms.Button
Friend WithEvents Button10 As System.Windows.Forms.Button
Friend WithEvents Button11 As System.Windows.Forms.Button
Friend WithEvents Button12 As System.Windows.Forms.Button
Friend WithEvents Button13 As System.Windows.Forms.Button
Friend WithEvents Button14 As System.Windows.Forms.Button
Friend WithEvents Button15 As System.Windows.Forms.Button
Friend WithEvents Button16 As System.Windows.Forms.Button
System.Diagnostics.DebuggerStepThrough() Private Sub InitializeComponent()
Me.Label1 = New System.Windows.Forms.Label
Me.TextBox1 = New System.Windows.Forms.TextBox
Me.Button1 = New System.Windows.Forms.Button
Me.Button2 = New System.Windows.Forms.Button
Me.Button3 = New System.Windows.Forms.Button
Me.Button4 = New System.Windows.Forms.Button
Me.Button5 = New System.Windows.Forms.Button
Me.Button6 = New System.Windows.Forms.Button
Me.Button7 = New System.Windows.Forms.Button
Me.Button8 = New System.Windows.Forms.Button
Me.Button9 = New System.Windows.Forms.Button
Me.Button10 = New System.Windows.Forms.Button
Me.Button11 = New System.Windows.Forms.Button
Me.Button12 = New System.Windows.Forms.Button
Me.Button13 = New System.Windows.Forms.Button
Me.Button14 = New System.Windows.Forms.Button
Me.Button15 = New System.Windows.Forms.Button
Me.Button16 = New System.Windows.Forms.Button
Me.SuspendLayout()
'
'Label1
'
Me.Label1.Location = New System.Drawing.Point(16, 16)
Me.Label1.Name = "Label1"
Me.Label1.Size = New System.Drawing.Size(48, 16)
Me.Label1.TabIndex = 0
Me.Label1.Text = "结果："
'
'TextBox1
'
Me.TextBox1.Location = New System.Drawing.Point(64, 8)
Me.TextBox1.Name = "TextBox1"
Me.TextBox1.Size = New System.Drawing.Size(120, 21)
Me.TextBox1.TabIndex = 1
Me.TextBox1.Text = ""
'
'Button1
'
Me.Button1.Location = New System.Drawing.Point(200, 8)
Me.Button1.Name = "Button1"
Me.Button1.Size = New System.Drawing.Size(56, 24)
Me.Button1.TabIndex = 2
Me.Button1.Text = "清空"
'
'Button2
'
Me.Button2.Location = New System.Drawing.Point(48, 56)
Me.Button2.Name = "Button2"
Me.Button2.Size = New System.Drawing.Size(24, 24)
Me.Button2.TabIndex = 3
Me.Button2.Text = "1"
'
'Button3
'
Me.Button3.Location = New System.Drawing.Point(88, 56)
Me.Button3.Name = "Button3"
Me.Button3.Size = New System.Drawing.Size(24, 24)
Me.Button3.TabIndex = 4
Me.Button3.Text = "2"
'
'Button4
'
Me.Button4.Location = New System.Drawing.Point(136, 56)
Me.Button4.Name = "Button4"
Me.Button4.Size = New System.Drawing.Size(24, 24)
Me.Button4.TabIndex = 5
Me.Button4.Text = "3"
'
'Button5
'
Me.Button5.Location = New System.Drawing.Point(48, 88)
Me.Button5.Name = "Button5"
Me.Button5.Size = New System.Drawing.Size(24, 24)
Me.Button5.TabIndex = 6
Me.Button5.Text = "4"
'
'Button6
'
Me.Button6.Location = New System.Drawing.Point(88, 88)
Me.Button6.Name = "Button6"
Me.Button6.Size = New System.Drawing.Size(24, 24)
Me.Button6.TabIndex = 7
Me.Button6.Text = "5"
'
'Button7
'
Me.Button7.Location = New System.Drawing.Point(136, 88)
Me.Button7.Name = "Button7"
Me.Button7.Size = New System.Drawing.Size(24, 24)
Me.Button7.TabIndex = 8
Me.Button7.Text = "6"
'
'Button8
'
Me.Button8.Location = New System.Drawing.Point(48, 120)
Me.Button8.Name = "Button8"
Me.Button8.Size = New System.Drawing.Size(24, 24)
Me.Button8.TabIndex = 9
Me.Button8.Text = "7"
'
'Button9
'
Me.Button9.Location = New System.Drawing.Point(88, 120)
Me.Button9.Name = "Button9"
Me.Button9.Size = New System.Drawing.Size(24, 24)
Me.Button9.TabIndex = 10
Me.Button9.Text = "8"
'
'Button10
'
Me.Button10.Location = New System.Drawing.Point(136, 120)
Me.Button10.Name = "Button10"
Me.Button10.Size = New System.Drawing.Size(24, 24)
Me.Button10.TabIndex = 11
Me.Button10.Text = "9"
'
'Button11
'
Me.Button11.Location = New System.Drawing.Point(48, 152)
Me.Button11.Name = "Button11"
Me.Button11.Size = New System.Drawing.Size(24, 24)
Me.Button11.TabIndex = 12
Me.Button11.Text = "0"
'
'Button12
'
Me.Button12.Location = New System.Drawing.Point(176, 56)
Me.Button12.Name = "Button12"
Me.Button12.Size = New System.Drawing.Size(24, 24)
Me.Button12.TabIndex = 13
Me.Button12.Text = "+"
'
'Button13
'
Me.Button13.Location = New System.Drawing.Point(176, 88)
Me.Button13.Name = "Button13"
Me.Button13.Size = New System.Drawing.Size(24, 24)
Me.Button13.TabIndex = 14
Me.Button13.Text = "-"
'
'Button14
'
Me.Button14.Location = New System.Drawing.Point(176, 120)
Me.Button14.Name = "Button14"
Me.Button14.Size = New System.Drawing.Size(24, 24)
Me.Button14.TabIndex = 15
Me.Button14.Text = "*"
'
'Button15
'
Me.Button15.Location = New System.Drawing.Point(176, 152)
Me.Button15.Name = "Button15"
Me.Button15.Size = New System.Drawing.Size(24, 24)
Me.Button15.TabIndex = 16
Me.Button15.Text = "/"
'
'Button16
'
Me.Button16.Location = New System.Drawing.Point(88, 152)
Me.Button16.Name = "Button16"
Me.Button16.Size = New System.Drawing.Size(72, 24)
Me.Button16.TabIndex = 17
Me.Button16.Text = "计算"
'
'SimpleCalculator
'
Me.AutoScaleBaseSize = New System.Drawing.Size(6, 14)
Me.ClientSize = New System.Drawing.Size(264, 190)
Me.Controls.Add(Me.Button16)
Me.Controls.Add(Me.Button15)
Me.Controls.Add(Me.Button14)
Me.Controls.Add(Me.Button13)
Me.Controls.Add(Me.Button12)
Me.Controls.Add(Me.Button11)
Me.Controls.Add(Me.Button10)
Me.Controls.Add(Me.Button9)
Me.Controls.Add(Me.Button8)
Me.Controls.Add(Me.Button7)
Me.Controls.Add(Me.Button6)
Me.Controls.Add(Me.Button5)
Me.Controls.Add(Me.Button4)
Me.Controls.Add(Me.Button3)
Me.Controls.Add(Me.Button2)
Me.Controls.Add(Me.Button1)
Me.Controls.Add(Me.TextBox1)
Me.Controls.Add(Me.Label1)
Me.Name = "SimpleCalculator"
Me.Text = "简单计算器"
Me.ResumeLayout(False)
End Sub
#End Region
Private Sub TextBox1_TextChanged(ByVal sender As System.Object, ByVal e As System.EventArgs)
End Sub
Private Sub TextBox1_TabStopChanged(ByVal sender As System.Object, ByVal e As System.EventArgs)
End Sub
Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button2.Click
Dim btn As Button '按钮类型的变量
btn = sender '把产生该事件的按钮对象赋值给btn
TextBox1.Text = TextBox1.Text + btn.Text '把该按钮的Text属性值连接到TextBox1中
End Sub
Private Sub Button3_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button3.Click
Dim btn As Button
btn = sender
TextBox1.Text += btn.Text
End Sub
Private Sub Button4_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button4.Click
Dim btn As Button
btn = sender
TextBox1.Text += btn.Text
End Sub
Private Sub Button5_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button5.Click
Dim btn As Button
btn = sender
TextBox1.Text += btn.Text
End Sub
Private Sub Button6_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button6.Click
Dim btn As Button
btn = sender
TextBox1.Text += btn.Text
End Sub
Private Sub Button7_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button7.Click
Dim btn As Button
btn = sender
TextBox1.Text += btn.Text
End Sub
Private Sub Button8_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button8.Click
Dim btn As Button
btn = sender
TextBox1.Text += btn.Text
End Sub
Private Sub Button9_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button9.Click
Dim btn As Button
btn = sender
TextBox1.Text += btn.Text
End Sub
Private Sub Button10_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button10.Click
Dim btn As Button
btn = sender
TextBox1.Text += btn.Text
End Sub
Private Sub Button11_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button11.Click
Dim btn As Button
btn = sender
TextBox1.Text += btn.Text
End Sub
Private Sub Button12_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button12.Click
Dim btn As Button
btn = sender
'在文本框的Text属性后连接一个空格、本按钮的Text属性值和一个空格
TextBox1.Text = TextBox1.Text + " " + btn.Text + " "
End Sub
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click
TextBox1.Text = "" '清空文本框
End Sub
Private Sub Button13_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button13.Click
Dim btn As Button
btn = sender
TextBox1.Text = TextBox1.Text + " " + btn.Text + " "
End Sub
Private Sub Button14_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button14.Click
Dim btn As Button
btn = sender
TextBox1.Text = TextBox1.Text + " " + btn.Text + " "
End Sub
Private Sub Button15_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button15.Click
Dim btn As Button
btn = sender
TextBox1.Text = TextBox1.Text + " " + btn.Text + " "
End Sub
Private Sub Button16_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button16.Click
'发生错误转移到标号“ErrorPro”指定的行去执行错误处理程序
On Error GoTo ErrorPro
Dim r As Decimal '保存计算结果的变量
Dim t As String = TextBox1.Text '用于保存文本框中的算术表达式
Dim space As Integer = t.IndexOf(" ") '搜索空格位置,如果没有空格，返回值为0
'字符串的取子符方法，第二个参数小于0，则将产生错误号为5的异常，即过程参数不正确
Dim s1 As String = t.Substring(0, space) '通过取子串方法获得第一个运算数
Dim op As String = t.Substring(space + 1, 1) '通过取子串方法获得运算符
Dim s2 As String = t.Substring(space + 3) '通过取子串方法获得第二个运算数
Dim arg1, arg2 As Integer
arg1 = Val(s1) : arg2 = Val(s2)
Select Case op
Case "+" : r = arg1 + arg2
Case "-" : r = arg1 - arg2
Case "*" : r = arg1 * arg2
Case "/" : r = arg1 / arg2
Case Else
MsgBox("输入的运算符有误！")
Exit Sub
End Select
TextBox1.Text = CStr(r) '显示结果
Exit Sub '退出过程
ErrorPro: '错误处理程序块
Select Case Err.Number
Case 6 '除数为零时，或运算溢出时的错误号
MsgBox("算术运算溢出！", , "溢出提示")
TextBox1.Focus()
Exit Sub
Case 5 ' Substring过程的参数不符合要求的错误号
MsgBox("必须输入运算符和第二个运算数！", , "运算数少")
Exit Sub
Case Else
'其它情况显示错误号和错误原因
MsgBox("错误号为" Err.Number Chr(10) Chr(13) "错误原因：" Err.Description)
Exit Sub
End Select
End Sub
End Class
这个啊，呵呵，应该不难吧
先找到你要打开的应用程序的文件
然后用一个调用代码：
System.Diagnostics.Process.Start("C:\WINDOWS\system32\notepad.exe")
这是要开记事本的
System.Diagnostics.Process.Start("C:\WINDOWS\system32\calc.exe")
这是打开计算器的
应该也可以把这两个应用程序复制到你的程序的默认目录下，就是BIN下吧！
呵呵，试试！！要给我加分哦！！！
简单的说拖出一些控件，设置相应的caption和属性等等，双击每个button控件，进行相应的处理，即可
