13518219792
这篇文章主要介绍“rgw内置civetweb的参数初始化怎么实现”，在日常操作中，相信很多人在rgw内置civetweb的参数初始化怎么实现问题上存在疑惑，小编查阅了各式资料，整理出简单好用的操作方法，希望对大家解答”rgw内置civetweb的参数初始化怎么实现”的疑惑有所帮助！接下来，请跟着小编一起来学习吧！
在临城等地区，都构建了全面的区域性战略布局，加强发展的系统性、市场前瞻性、产品创新能力，以专注、极致的服务理念，为客户提供网站设计制作、成都网站设计 网站设计制作按需设计网站,公司网站建设,企业网站建设,品牌网站制作,营销型网站,外贸营销网站建设,临城网站建设费用合理。
1. 初始化civetweb时刻的参数传递
src/civetweb/civetweb.h
/* Start web server.
Parameters:
callbacks: mg_callbacks structure with user-defined callbacks.
options: NULL terminated list of option_name, option_value pairs that
specify Civetweb configuration parameters.
Side-effects: on UNIX, ignores SIGCHLD and SIGPIPE signals. If custom
processing is required for these, signal handlers must be set up
after calling mg_start().
Example:
const char *options[] = {
"document_root", "/var/www",
"listening_ports", "80,443s",
NULL
};
struct mg_context *ctx = mg_start(&my_func, NULL, options);
Refer to https://github.com/bel2125/civetweb/blob/master/docs/UserManual.md
for the list of valid option and their possible values.
Return:
web server context, or NULL on error. */
CIVETWEB_API struct mg_context *mg_start(const struct mg_callbacks *callbacks,
void *user_data,
const char **configuration_options);civetweb启动时的参数初始化由mg_start函数实现，注意configuration_options为具体的配置参数
src/rgw/rgw_civetweb_frontend.cc
int RGWMongooseFrontend::run() {
char thread_pool_buf[32];
snprintf(thread_pool_buf, sizeof(thread_pool_buf), "%d",
(int)g_conf->rgw_thread_pool_size);
string port_str;
map conf_map = conf->get_config_map();
conf->get_val("port", "80", &port_str);
conf_map.erase("port");
conf_map["listening_ports"] = port_str; #默认端口设置
set_conf_default(conf_map, "enable_keep_alive", "yes"); #默认开启了keepalive
set_conf_default(conf_map, "num_threads", thread_pool_buf); #从rgw_thread_pool_size这个配置项中读取对应的并发数
set_conf_default(conf_map, "decode_url", "no");
// Set run_as_user. This will cause civetweb to invoke setuid() and setgid()
// based on pw_uid and pw_gid obtained from pw_name.
string uid_string = g_ceph_context->get_set_uid_string();
if (!uid_string.empty()) {
conf_map.erase("run_as_user");
conf_map["run_as_user"] = uid_string;
}
const char *options[conf_map.size() * 2 + 1];
int i = 0;
for (map::iterator iter = conf_map.begin();
iter != conf_map.end(); ++iter) {
options[i] = iter->first.c_str();
options[i + 1] = iter->second.c_str();
dout(20)<< "civetweb config: " << options[i] << ": "
<< (options[i + 1] ? options[i + 1] : "") << dendl;
i += 2;
}
options[i] = NULL;
struct mg_callbacks cb;
memset((void *)&cb, 0, sizeof(cb));
cb.begin_request = civetweb_callback;
cb.log_message = rgw_civetweb_log_callback;
cb.log_access = rgw_civetweb_log_access_callback;
ctx = mg_start(&cb, &env, (const char **)&options);#启动civetweb
if (!ctx) {
return -EIO;
}
return 0;
} /* RGWMongooseFrontend::run */ 通过RGWMongooseFrontend的run方法，实现了civetweb的启动参数初始化。
Limit download speed for clients. throttle is a comma-separated list of key=value pairs, where key could be:
* limit speed for all connections x.x.x.x/mask limit speed for specified subnet uri_prefix_pattern limit speed for given URIs
The value is a floating-point number of bytes per second, optionally followed by a k or m character, meaning kilobytes and megabytes respectively. A limit of 0 means unlimited rate. The last matching rule wins. Examples:
*=1k,10.0.0.0/8=0 limit all accesses to 1 kilobyte per second, but give connections the from 10.0.0.0/8 subnet unlimited speed /downloads/=5k limit accesses to all URIs in `/downloads/` to 5 kilobytes per second. All other accesses are unlimited
可以实现针对不同的subnet和URL设置下载速度，在需要限速的场景下比较有用
An Access Control List (ACL) allows restrictions to be put on the list of IP addresses which have access to the web server. In the case of the Civetweb web server, the ACL is a comma separated list of IP subnets, where each subnet is pre-pended by either a - or a + sign. A plus sign means allow, where a minus sign means deny. If a subnet mask is omitted, such as -1.2.3.4, this means to deny only that single IP address.
Subnet masks may vary from 0 to 32, inclusive. The default setting is to allow all accesses. On each request the full list is traversed, and the last match wins. Examples:
-0.0.0.0/0,+192.168/16 deny all accesses, only allow 192.168/16 subnet
这个应该都比较熟了，ACL控制哪些subnet或者host可以访问
Number of worker threads. Civetweb handles each incoming connection in a separate thread. Therefore, the value of this option is effectively the number of concurrent HTTP connections Civetweb can handle.
控制单个civetweb实例的最大并发数
This option can be used to enable or disable the use of the Linux sendfile system call. It is only available for Linux systems and only affecting HTTP (not HTTPS) connections if throttle is not enabled. While using the sendfile call will lead to a performance boost for HTTP connections, this call may be broken for some file systems and some operating system versions.
援引一段对sendfile特性的描述
sendfile() copies data between one file descriptor and another.Because this copying is done within the kernel, sendfile() is more efficient than the combination of read(2) and write(2), which would require transferring data to and from user space.
启动该特性以后部分数据复制操作将在内核内部完成，能够减少上下文切换带来的性能损耗。
到此，关于“rgw内置civetweb的参数初始化怎么实现”的学习就结束了，希望能够解决大家的疑惑。理论与实践的搭配能更好的帮助大家学习，快去试试吧！若想继续学习更多相关知识，请继续关注创新互联网站，小编会继续努力为大家带来更多实用的文章！
