13518219792
网站建设资讯

NEWS

网站建设资讯

LB服务器负载均衡【旁路部署】

LB旁路部署案例
一、 需求

晋中ssl适用于网站、小程序/APP、API接口等需要进行数据传输应用场景，ssl证书未来市场广阔！成为创新互联建站的ssl证书销售渠道，可以享受市场价格4-6折优惠！如果有意向欢迎电话联系或者加微信：13518219792（备注：SSL证书合作）期待与您的合作！

  • 为了实现服务器对外网用户提供服务的可靠性，客户在现网中部署了LB设备，LB采用旁路方式部署，要求外网主机访问时的流量经过LB轮询到内部服务器，一台服务器down机不影响其正常业务。
    二、 拓扑环境
    LB 服务器负载均衡【旁路部署】
    三、 配置思路
  • 配置各个设备ip地址及路由，保证ip可达
  • 配置检测模板
  • 配置ip地址池
  • 配置实服务组，调用检测模板和ip地址池
  • 配置实服务，关联实服务组
  • 配置虚服务器，关联实服务组
  • 测试
    四、 配置步骤
    配置脚本如下所示：
    出口NAT设备配置： 
    
sysname NAT
#
system-working-mode standard
xbar load-single
password-recovery enable
lpu-type f-series
#
vlan 1
#
interface Serial1/0
#
interface Serial2/0
#
interface Serial3/0
#
interface Serial4/0
#
interface NULL0
#
interface GigabitEthernet0/0
port link-mode route
combo enable copper
ip address 192.168.34.4 255.255.255.0
#
interface GigabitEthernet0/1
port link-mode route
combo enable copper
ip address 100.1.46.4 255.255.255.0
nat outbound
nat server protocol tcp global 100.1.46.4 2323 inside 192.168.35.5 2323
#
interface GigabitEthernet0/2
port link-mode route
combo enable copper
#
interface GigabitEthernet5/0
port link-mode route
combo enable copper
#
interface GigabitEthernet5/1
port link-mode route
combo enable copper
#
interface GigabitEthernet6/0
port link-mode route
combo enable copper
#
interface GigabitEthernet6/1
port link-mode route
combo enable copper
#
scheduler logfile size 16
#
line class aux
user-role network-operator
#
line class console
user-role network-admin
#
line class tty
user-role network-operator
#
line class vty
user-role network-operator
#
line aux 0
user-role network-operator
#
line con 0
user-role network-admin
#
line vty 0 63
user-role network-operator
#
ip route-static 0.0.0.0 0 100.1.46.6
ip route-static 192.168.1.0 24 192.168.34.3
ip route-static 192.168.2.0 24 192.168.34.3
ip route-static 192.168.35.0 24 192.168.34.3
#
domain system
#
domain default enable system
#
role name level-0
description Predefined level-0 role
#
role name level-1
description Predefined level-1 role
#
role name level-2
description Predefined level-2 role
#
role name level-3
description Predefined level-3 role
#
role name level-4
description Predefined level-4 role
#
role name level-5
description Predefined level-5 role
#
role name level-6
description Predefined level-6 role
#
role name level-7
description Predefined level-7 role
#
role name level-8
description Predefined level-8 role
#
role name level-9
description Predefined level-9 role
#              
role name level-10
description Predefined level-10 role
#
role name level-11
description Predefined level-11 role
#
role name level-12
description Predefined level-12 role
#
role name level-13
description Predefined level-13 role
#
role name level-14
description Predefined level-14 role
#
user-group system

LB关键配置：

interface GigabitEthernet1/0/1
 port link-mode route
 combo enable copper
 ip address 192.168.0.1 255.255.255.0
#
interface GigabitEthernet1/0/2
 port link-mode route
 combo enable copper
 ip address 192.168.35.5 255.255.255.0

loadbalance snat-pool pool
 ip range start 192.168.35.5 end 192.168.35.5
#
server-farm sf
 snat-pool pool
 probe t1
#
real-server rs1
 ip address 192.168.1.1
 port 23
 weight 150
 server-farm sf
#
real-server rs2
 ip address 192.168.2.2
 port 23
 weight 120    
 server-farm sf
#
virtual-server vs type tcp
 port 2323 
 virtual ip address 192.168.35.5
 default server-farm sf
 service enable
 #
 ip route-static 0.0.0.0 0 192.168.35.3
#
acl basic 2000
 rule 0 permit
security-zone name Trust
 import interface GigabitEthernet1/0/2
#
security-zone name DMZ
#
security-zone name Untrust
#
security-zone name Management
#
zone-pair security source Any destination Any
 packet-filter 2000
#
return

五、 测试
外网主机telnet外网映射到LB的地址和端口，看是否可以访问到内部服务器
telnet 100.1.46.4 2323
Trying 100.1.46.4 ...
Press CTRL+K to abort
Connected to 100.1.46.4 ...



dis ip int brief
*down: administratively down
(s): spoofing (l): loopback
Interface Physical Protocol IP Address Description
GE0/0 down down -- --
GE0/1 up up 192.168.1.1 --
测试后可以正常访问到服务器A

退出登录后再尝试登录下，测试看是否可以轮询到另一个服务器
quit

The connection was closed by the remote host!
telnet 100.1.46.4 2323
Trying 100.1.46.4 ...
Press CTRL+K to abort
Connected to 100.1.46.4 ...


dis ip int brief
*down: administratively down
(s): spoofing (l): loopback
Interface Physical Protocol IP Address Description
GE0/0 up up 192.168.2.2 --

LB>dis real-server statistics
Slot 1:
Real server: rs1
Total connections: 7
Active connections: 0
Max connections: 1
Connections per second: 0
Max connections per second: 1
Server input: 13601 bytes
Server output: 15872 bytes
Throughput: 0 bytes/s
Inbound throughput: 0 bytes/s
Outbound throughput: 0 bytes/s
Max throughput: 3612 bytes/s
Max inbound throughput: 1359 bytes/s
Max outbound throughput: 2253 bytes/s
Received packets: 252
Sent packets: 238
Dropped packets: 0
Received requests: 0
Dropped requests: 0
Sent responses: 0
Dropped responses: 0
Connection failures: 0

Real server: rs2
Total connections: 8
Active connections: 1
Max connections: 1
Connections per second: 0
Max connections per second: 1
Server input: 15552 bytes
Server output: 17213 bytes
Throughput: 0 bytes/s
Inbound throughput: 0 bytes/s
Outbound throughput: 0 bytes/s
Max throughput: 5796 bytes/s
Max inbound throughput: 2451 bytes/s
Max outbound throughput: 3345 bytes/s
Received packets: 288
Sent packets: 264
Dropped packets: 0
Received requests: 0
Dropped requests: 0
Sent responses: 0
Dropped responses: 0
Connection failures: 0

dis virtual-server statistics
Slot 1:
Virtual server: vs
Total connections: 15
Active connections: 1
Max connections: 2
Connections per second: 0
Max connections per second: 1
Client input: 29257 bytes
Client output: 33165 bytes
Throughput: 0 bytes/s
Inbound throughput: 0 bytes/s
Outbound throughput: 0 bytes/s
Max throughput: 5796 bytes/s
Max inbound throughput: 2451 bytes/s
Max outbound throughput: 3345 bytes/s
Received packets: 542
Sent packets: 504
Dropped packets: 0
六、 注意事项

  • 该拓扑图中，如果只是单纯配置服务器负载均衡，不针对外网进来的源做snat的话，是无法访问到服务器的，原因是，外网终端向LB发起访问，但是数据包回复时却是内网服务器直接给予的回应，服务器回包时，数据包到核心设备，直接按照缺省路由去做转发了，即使客户端收到数据包，由于发起和回应的地址不一致，则会认为数据包不是自己想要的，会直接丢弃
  • 配置LB时，新建实服务，关联实服务组，最后在虚服务器下做关联时，设备会根据检测模板去轮询看是否和服务器可达，如果可达，将处于active状态，如果检测不可达，处于Probe-failed

本文标题：LB服务器负载均衡【旁路部署】
浏览路径：http://cdweb.net/article/goipgc.html

其他资讯