13518219792
linux中如何批量管理用户和组？这篇文章运用了实例代码展示，代码非常详细，可供感兴趣的小伙伴们参考借鉴，希望对大家有所帮助。
使用/etc/sudoers里设置用户别名、命令别名来设置各个用户类型所需要的权限和命令来控制用户权限和所能使用的命令
主机别名# Host_Alias FILESERVERS = fs1, fs2
用户别名
组别名
# User_Alias ADMINS = jsmith, mikem
# User_alias AdminsGroup=%xbin命令别名# Cmnd_Alias SOFTWARE = /bin/rpm, /usr/bin/up2date, /usr/bin/yum
配置
用户 主机=(主机) 命令
root ALL=(ALL) ALL
sudoers文件配置
[root@xbin-S ~]# grep -v "##" /etc/sudoers
# Host_Alias FILESERVERS = fs1, fs2
# Host_Alias MAILSERVERS = smtp, smtp2
# User_Alias ADMINS = jsmith, mikem
# Cmnd_Alias NETWORKING = /sbin/route, /sbin/ifconfig, /bin/ping, /sbin/dhclient, /usr/bin/net, /sbin/iptables, /usr/bin/rfcomm, /usr/bin/wvdial, /sbin/iwconfig, /sbin/mii-tool
# Cmnd_Alias SOFTWARE = /bin/rpm, /usr/bin/up2date, /usr/bin/yum
# Cmnd_Alias SERVICES = /sbin/service, /sbin/chkconfig
# Cmnd_Alias LOCATE = /usr/bin/updatedb
# Cmnd_Alias STORAGE = /sbin/fdisk, /sbin/sfdisk, /sbin/parted, /sbin/partprobe, /bin/mount, /bin/umount
# Cmnd_Alias DELEGATING = /usr/sbin/visudo, /bin/chown, /bin/chmod, /bin/chgrp
# Cmnd_Alias PROCESSES = /bin/nice, /bin/kill, /usr/bin/kill, /usr/bin/killall
# Cmnd_Alias DRIVERS = /sbin/modprobe
# Defaults specification
#
# Refuse to run if unable to disable echo on the tty.
#
Defaults !visiblepw
#
# Preserving HOME has security implications since many programs
# use it when searching for configuration files. Note that HOME
# is already set when the the env_reset option is enabled, so
# this option is only effective for configurations where either
# env_reset is disabled or HOME is present in the env_keep list.
#
Defaults always_set_home
Defaults env_reset
Defaults env_keep = "COLORS DISPLAY HOSTNAME HISTSIZE INPUTRC KDEDIR LS_COLORS"
Defaults env_keep += "MAIL PS1 PS2 QTDIR USERNAME LANG LC_ADDRESS LC_CTYPE"
Defaults env_keep += "LC_COLLATE LC_IDENTIFICATION LC_MEASUREMENT LC_MESSAGES"
Defaults env_keep += "LC_MONETARY LC_NAME LC_NUMERIC LC_PAPER LC_TELEPHONE"
Defaults env_keep += "LC_TIME LC_ALL LANGUAGE LINGUAS _XKB_CHARSET XAUTHORITY"
#
# Adding HOME to env_keep may enable a user to run unrestricted
# commands via sudo.
#
# Defaults env_keep += "HOME"
Defaults secure_path = /sbin:/bin:/usr/sbin:/usr/bin
root ALL=(ALL) ALL
xbin ALL=(ALL) ALL
# %sys ALL = NETWORKING, SOFTWARE, SERVICES, STORAGE, DELEGATING, PROCESSES, LOCATE, DRIVERS
# %wheel ALL=(ALL) ALL
# %wheel ALL=(ALL) NOPASSWD: ALL
# %users ALL=/sbin/mount /mnt/cdrom, /sbin/umount /mnt/cdrom
# %users localhost=/sbin/shutdown -h now
#includedir /etc/sudoers.d
Defaults logfile=/var/log/sudo.log实战命令
批量建立用户
for user in chuji001 chuji002 chuji003 net001 senior001 manager001
do
useradd $user
echo "111111" | passwd --stdin $user
done
for n in `seq 5`
do
useradd -g phpers php00$n
echo "111111" | passwd --stdin php00$n
done
for user in kaifamanager001 seniorphpers
do
useradd $user
echo "111111" | passwd --stdin $user
done
sudoers 配置文件
Cmnd_Alias CY_CMD_1 = /usr/bin/free, /usr/bin/iostat ,/usr/bin/top, /bin/hostname, /sbin/ifconfig,/bin/netstat, /sbin/route
Cmnd_Alias GY_CMD_1 = /usr/bin/free, /usr/bin/iostat ,/usr/bin/top, /bin/hostname, /sbin/ifconfig,/bin/netstat, /sbin/route, /sbin/iptables, /etc/init.d/network, /bin/nice, /bin/kill/, /usr/bin/kill,/usr/bin/killall, /bin/rpm, /usr/bin/up2data, /user/bin/yum, /sbin/fdisk, /sbin/parted, /sbin/partprobe, /bin/mount, /bin/umount
Cmnd_Alias CK_CMD_1 = /usr/bin/tail /app/log*, /bin/grep /app/log*, /bin/cat, /bin/ls
Cmnd_Alias GK_CMD_1 = /sbin/service, /sbin/chkconfig, /bin/tail /app/log*, /bin/grep /app/log*, /bin/cat, /bin/ls, /bin/sh ~/scripts/deploy.sh
Cmnd_Alias GW_CMD_1 = /sbin/route, /sbin/ifconfig, /bin/ping, /sbin/dhclient, /usr/bin/net /sbin/iptables, /usr/bin/rfcomm, /usr/bin/wvdial, /sbin/iwconfig, /sbin/mii-tool, /bin/cat /var/log/*
User_Alias CHUJIADMINS = chuji001, chuji002, chuji003
User_Alias GWNETADMINS = net001
User_Alias CHUJI_KAIFA = %phpers
Runas_Alias OP = root
senior001 ALL=(OP) GY_CMD_1
manager001 ALL=(ALL) NOPASSWD:ALL
kaifamanager001 ALL=(ALL) ALL, /usr/bin/passwd [A-Za-z]*,!/usr/bin/passwd root, !/usr/sbin/visudo, ~/usr/bin/vi *sudoer*
seniorphpers ALL=(OP) GK_CMD_1
CHUJIADMINS ALL=(OP) CY_CMD_1
GWNETADMINS ALL=(OP) GW_CMD_1
CHUJI_KAIFA ALL=(OP) CK_CMD_1批量创建20个用户，并设置密码为用户后随机5位数
[root@xbin-S ~]# cat test5.sh
#!/bin/bash
export PTAH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/snap/bin
for n in `seq 20`
do
useradd user$n
echo "user$n`echo user$n|md5sum | cut -c1-5`" | passwd --stdin user$n
echo "user$n:user$n`echo user$n|md5sum | cut -c1-5`" >> /tmp/user_passwd.txt
#echo "user$n`echo user$n|md5sum | cut -c1-5`"
done看完这篇文章，你们学会在linux中批量管理用户和组了吗？如果还想学到更多技能或想了解更多相关内容，欢迎关注创新互联行业资讯频道，感谢各位的阅读。
另外有需要云服务器可以了解下创新互联cdcxhl.cn，海内外云服务器15元起步，三天无理由+7*72小时售后在线，公司持有idc许可证，提供“云服务器、裸金属服务器、高防服务器、香港服务器、美国服务器、虚拟主机、免备案服务器”等云主机租用服务以及企业上云的综合解决方案，具有“安全稳定、简单易用、服务可用性高、性价比高”等特点与优势，专为企业上云打造定制，能够满足用户丰富、多元化的应用场景需求。
