13518219792
步骤如下： 1、把鼠标移动到伏樱屏幕中间缺此丛的顶部。 2、然后会弹出一扒仿个窗口。 3、点击窗口上的全屏按钮就可以退出全屏，回到主机了。
10多年的剑阁网站建设经验，针对设计、前端、开发、售后、文案、推广等六对一服务，响应快，48小时及时工作处理。网络营销推广的优势是能够根据用户设备显示端的尺寸不同，自动调整剑阁建站的显示方式，使网站能够适用不同显示终端，在浏览器中调整网站的宽度，无论在任何一种浏览器上浏览网站，都能展现优雅布局与设计，从而大程度地提升浏览体验。成都创新互联从事“剑阁网站设计”,“剑阁网站推广”以来，每个客户项目都认真落实执行。
Ctrl+Alt+Enter后，虚拟机倒是全屏了，但因为linux的显示率太小，所以只能占据屏幕的一部分！
故调整linux显示率即可：
右上角-系统设置-显示，将分辨率调整成显示器的分历源念辨率就ok了！
注肢困意：
分辨率大于显示器建议分辨率，则系统只能显示一部分，右侧或底部会出现滚动条，
而当分辨率设置太小时，当然就不能占据整个屏幕了！
调整分辨率后，Ctrl+Alt+Enter将虚拟机全屏显示裂判，ok，linux也全屏了！
按 下面的步骤去做，改变分辨率。你是在虚拟机下面装的吧？
xp系统下的虚拟机中安装了linux后，虚拟机VMware中的linux界面太小，是由于
linux分辨率太低(通常为800×600)造成的，可以通过安装VMware Tools来更改分
辨率到1024×768来解决这个问题，下面说明安灶大装VMware Tools并配置分辨率的
步骤：
1.安装工具。让虚拟机运行于窗口状态，不要全屏，按Ctrl+Alt让鼠标释放出来。在VMware的菜单栏上选择"虚拟机/安御辩斗装虚拟机工具(VM/Install VMware Tools...)"。然后切换到客户操作系统，即Linux。
2.挂载光盘。
# mount /dev/cdrom /mnt/cdrom
3.执行命令。进入虚拟光盘，可以看到有两个文件，一个是压缩包，一个为rpm包。直接运行rpm包安装，命令行也可。rpm -Uvh VMwareTools-版本号-版本号.i386.rpm
# cd /mnt/cdrom
# ls -l
有两上文件 ：
VMwareTools-5.5.1-19175.i386.rpm
VMwareTools-5.5.1-19175.tar.gz
并把这两个文件拷贝到镇磨你的文件下 如 /tmp
#cp VMwareTools-5.5.1-19175.tar.gz /tmp
#cp VMwareTools-5.5.1-19175.i386.rpm /tmp
#cd /tmp
#rpm -ivh VMwareTools-5.5.1-19175.i386.rpm
4.上述操作完成后，进入/usr/bin目录，查找vmware-config-tools.pl.找到后，运行它。
5.一路回车
6.
#tar -xzvf VMwareTools-5.5.1-19175.tar.gz
#cd vmware-tools-distrib
#./vmware-install.pl
Creating a new installer database using the tar3 format.
Installing the content of the package.
# 安装过程的画面，全部使用默认值，一直按 Enter 就对了
In which directory do you want to install the binary files?
[/usr/bin]
What is the directory that contains the init directories (rc0.d/ to rc6.d/)?
[/etc/rc.d]
What is the directory that contains the init scripts?
[/etc/rc.d/init.d]
In which directory do you want to install the daemon files?
[/usr/sbin]
In which directory do you want to install the library files?
[/usr/lib/vmware-tools]
Thepath "/usr/lib/vmware-tools" does not exist currently. This program isgoingto create it, including needed parent directories. Is this whatyou want?
[yes]
In which directory do you want to install the documentation files?
[/usr/share/doc/vmware-tools]
Thepath "/usr/share/doc/vmware-tools" does not exist currently. Thisprogram isgoing to create it, including needed parent directories. Isthis what you want?
[yes]
The installation of VMware Tools 5.5.1 build-19175 for Linux completed
successfully. You can decide to remove this software from your system at any
time by invoking the following command: "/usr/bin/vmware-uninstall-tools.pl".
Before running VMware Tools for the first time, you need to configure it by
invoking the following command: "/usr/bin/vmware-config-tools.pl". Do you want
this program to invoke the command for you now? [yes]
Stopping VMware Tools services in the virtual machine:
Guest operating system daemon: [ 确定 ]
Trying to find a suitable vmhgfs module for your running kernel.
The module bld-2.6.9-5.EL-i686-RHEL4 loads perfectly in the running kernel.
pcnet32 30153 0
Unloading pcnet32 module
Trying to find a suitable vmxnet module for your running kernel.
The module bld-2.6.9-5.EL-i686-RHEL4 loads perfectly in the running kernel.
Detected X.org version 6.8.
关闭控制台鼠标服务： [ 确定 ]
启动控制台鼠标服务： [ 确定 ]
Please choose one of the following display sizes (1 - 13):
# 显示分辨率，这里是以 1024x768 为例
# VMware Tools 安装的时候，会自动修改 X server 的配置文件
[1] "640x480"
[2] "800x600"
[3] "1024x768"
[4] "1152x864"
[5] "1280x800"
[6] "1152x900"
[7] "1280x1024"
[8] "1376x1032"
[9] "1400x1050"
[10] "1680x1050"
[11] "1600x1200"
[12] "1920x1200"
[13] "2364x1773"
Please enter a number between 1 and 13:
[2] 3
X Window System Version 6.8.2
Release Date: 9 February 2005
X Protocol Version 11, Revision 0, Release 6.8.2
Build Operating System: Linux 2.6.9-34.EL i686 [ELF]
Current Operating System: Linux rd01.domain 2.6.9-34.EL #1 Wed Mar 8 00:07:35 CST 2006 i686
Build Date: 04 May 2006
Build Host: x8664-build.centos.org
Before reporting problems, check
to make sure that you have the latest version.
Module Loader present
OSKernel: Linux version 2.6.9-34.EL (buildcentos@build-i386) (gcc version3.4.5 20051201 (Red Hat 3.4.5-2)) #1 Wed Mar 8 00:07:35 CST 2006 P
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(++) Log file: "/tmp/vmware-config0/XF86ConfigLog.3131", Time: Mon Jun 12 20:57:34 2006
(++) Using config file: "/tmp/vmware-config0/XF86Config.3131"
(WW) VMWARE(0): Failed to set up write-combining range (0xf0000000,0x1000000)
X is running fine with the new config file.
Starting VMware Tools services in the virtual machine:
Switching to guest configuration: [ 确定 ]
Guest filesystem driver: [ 确定 ]
DMA setup: [ 确定 ]
Guest operating system daemon: [ 确定 ]
The configuration of VMware Tools 5.5.1 build-19175 for Linux for this running
kernel completed successfully.
You must restart your X session before any mouse or graphics changes take
effect.
You can now run VMware Tools by invoking the following command:
"/usr/bin/vmware-toolbox" during an XFree86 session.
To use the vmxnet driver, restart networking using the following commands:
/etc/init.d/network stop
rmmod pcnet32
rmmod vmxnet
depmod -a
modprobe vmxnet
/etc/init.d/network start
Enjoy,
--the VMware team
# shutdown -r now
# 修改完成之后，重新启动计算机，让 VMware Tools 生效
在\etc 目录下找到inittab文件VI 它，找到id:5:initdefault:改成id:3:initdefault: 这里5代表图形界面 3代表命令行的界面
按照Readme中的安装方法，一步步按照默认的设置下来，出现如下错误：
What is the location of the directory of C header files that match your running kernel? [/usr/src/linux/include]The directory
of kernel headers (version 2.6.18-8.el5xen) does not match.
可以使用
[root@localhost ~]# uname -r // 查看内核版本号
查看目录/usr/src/ 根本没有linux这个目录
在网上收到资料：没有安装 kernel-xen-devel rpm包，在安装盘中找到这个rpm包：kernel-xen-devel-2.6.18-8.el5.i686.rpm
安装：
[root@localhost ~]# rpm -ivh kernel-xen-devel-2.6.18-8.el5.i686.rpm
再使用vmware-install.pl安装，即可自动找到配套的the directory of C header files
注重，网上还有人说需要安装的rpm包是kernel-devel，经过测试，安装kernel-devel-2.6.18-8.el5.i686.rpm包后依然无法自动找到the
directory of C header files，假如手动改目录为：/usr/src/kernels/2.6.18-8.e15-i686/include，会出现错误：
The directory of kernel headers (version 2.6.18-8.el5) does not match your running kernel (version 2.6.18-8.el5xen). Even if
the module were tocompile successfully, it would not load into the running kernel.
这就是安装的rpm不正确导致的。
安装好kernel-xen-devel-2.6.18-8.el5.i686.rpm包后，这样就一直enter，装完VMware Tools
在安装的最后阶段，会出现：
Do you want to change your guest X resolution? (yes/no) [no] y
Please choose one of the following display sizes (1 - 13):
[1] "640x480"
[2] "800x600"
[3] "1024x768"
[4] "1152x864"
[5] "1280x800"
[6] "1152x900"
[7] "1280x1024"
[8] "1376x1032"
[9] "1400x1050"
[10] "1680x1050"
[11] "1600x1200"
[12] "1920x1200"
[13] "2364x1773"
Please enter a number between 1 and 13:
[3]
到了这步，千万别重启看效果，还要修改xorg config设置，不然重启后会报X-WINDOWS出错。
进入/etc/X11/，用文本打开xorg.conf，加上以下几段：
Section "Monitor"
Identifier "vmware"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "vmmouse"
Option "Protocol" "Auto"
Option "Device" "/dev/input/mouse0"
EndSection
然后找到 含有"ServerLayout" 的section, 在Section跟EndSection之间加上以下一行。
InputDevice "Mouse0" "CorePointer"
终于大功告成，重启看看效果了
重启之后，resolution不知道为何并没有变化，有待进一步研究，但是Mouse移进移出VMware可以不用再使用Ctrl+Alt键了
1、点击设置蚂链图标
2、进瞎烂入点击显示（display）
3、点击更改辨率磨物漏根据自机器辨率设定即全屏
